Choose State Change Location
HOME » Suppliers » Contractor Environmental, Health & Safety (EHS) Orientation and Training

Contractor Environmental, Health & Safety (EHS) Orientation and Training

Contractor, consultant and its personnel (including subcontractors) involved in the performance of services for Duke Energy's Fossil / Hydro Generation facilities shall complete the following orientation information below.  The completion of any required information will be the responsibility of the prospective Contractor and their firm prior to performing any services at Duke Energy Fossil / Hydro Generation facilities. 

  • Generic Duke Energy Fossil / Hydro Generation Contractor EHS Orientation (English version)
  • Generic Duke Energy Fossil / Hydro Generation Contractor EHS Orientation (Spanish version)
  • Station / fleet-specific EHS Orientation
  • Review of applicable sections of the Duke Energy Safe Work Practices Manual

Contractor, consultant and its personnel (including subcontractors) involved in the performance of services for Duke Energy Fossil / Hydro Generation facilities shall complete specific regulatory and Duke Energy policy-required EHS training, specifically associated with work to be performed.  Your Duke Energy facility sponsor and / or site EHS professionals will advise of required training and it will be the responsibility of the prospective Contractor, consultant, subcontractor and their firm prior to arriving to perform work to ensure such training is obtained. Completion of training can be recorded in the following spreadsheet:

The following list identifies pre-requisite EHS training that Duke Energy expects any contracting, subcontracting or consulting firm to provide their employees prior to arriving to perform work at ANY Duke Energy Fossil / Hydro Generation facilities, regardless of potential hazard exposure: 

The following required hazard/exposure-specific EHS Training listed below.  The completion of any required training and / or information will be the responsibility of the prospective Contractor and their firm prior to performing any services at Duke Energy. Additional training may be required by your Duke Energy Fossil / Hydro Generation facility sponsor.

  • Lockout / Tag-Out Protected Worker Training
  • Lockout / Tag-Out Work Leader (for contractor supervisors supervising protected workers)
  • Fall Hazard Awareness Training
  • Ammonia Awareness Training (Stations with ammonia on site)
  • Ammonia Worker Training (Belews Creek, Cliffside, East Bend and Gibson stations only)
  • Site Emergency Action Plan Training
  • Combustible Dust Training (coal plants only)
  • Hot Work Program Training
  • Safeguarding Floor and Wall Openings Training
  • Lead and Asbestos Awareness Training